RockJock's Sway Bar End Link Rod Pack includes 1 pair of each of our 5 most common sizes of our Antirock sway bar end link rods keeping you stocked and equipped to handle repairs and fine tunes to custom vehicles.
All rods feature 2 in. of 1/2 in.-20 LH thread and 2 in. of 1/2 in.-20 RH thread (with the exception of the 14 in. rods that features 4 5/8 inches of LH thread), providing adjustment as-is and extra thread allowing you to cut them shorter as deemed necessary by the application.
This pack is handy for replacing bent rods, or swapping into an Antiriock kit upon install to accommodate different lifts or custom vehicle builds. RockJock Anitrock end links are a modular system in that all other link hardware (rod ends, jam nuts) will work with any rods.

Kit Fits:

• Universal application
• Replacements for any RockJock Antirock end link studs

Kit Includes:

• (2)  CE-9901RD3  6 1/2 in. long stud
• (2)  CE-9901RD4  8 1/2 in. long stud
• (2)  CE-9901RD5  10 1/2 in. long stud
• (2)  RJ-517200-1  12 1/2 in. long stud
• (2)  CE-9901RD2  14 in. long stud

Rod Specs.:

• 1/2 in. Diameter
• 1/2 in.-20 RH threads – 2 in. long
• 1/2 in.-20 LH threads – 2 in. long (14 in. studs have 4 5/8 in. of LH)
• Wrench flat for an 11mm wrench
• Finish is zinc plating

Adjustment Range:

• With RockJock sealed ends – see specs. by rod length here
• With heim joint ends – see specs. by rod length here

Notes:

• Use with RockJock sealed rod end packs offered here
• Use with RockJock heim joint packs offered here