CE-7011D-BRKT - Fork Bracket (for GM A-Body Currectrac Control Arms)
Details
Details
This is the laser cut fork bracket from our CE-7011C and CE-7011D 1964-1972 GM A-body Currectrac control arm sets. This bracket goes over the rearend housing bushing and is designed to work with the stock hardware. Features 2 1/4 in. of 1 in.-14 RH thread. Sold each.
RockJock’s Control Arm Fork Bracket is an included component in our
The inside dimension of the fork is designed to fit a bushing or Johnny Joint that is 2 in. wide with a 1/2 in. thru bolt (stock JL/JT/JK).
Fork is laser cut and formed 3/16 in. steel with a 1 in.-14 RH threaded fitment welded in. Finish is semi-gloss black powder coat.
Kit Fits:
- Universal Application
- Included in 64-67 GM A-body rear upper control arm sets
- Included in 68-72 GM A-body rear upper control arm sets
Kit Includes:
- (1) Rear Upper Control Arm Fork Bracket
Component Specs.:
- Material = laser cut and formed 3/16 in. steel, steel threaded weldment
- Inside of Fork Dimension = 2.520 in. x 1/2 in. thru-bolt
- Overall Length = 7.310 in. (tip to tip)
- CL of Hole to End of Threads Length = 5.250 in.
- Thread Length = 2.250 in.
- Threads = 1 in.-14 RH
- Finish = semi-gloss black powder coat (threads masked)
Notes:
- This Fork is an included component in all of our 64-67 and GM A-body rear upper control arm sets.
- Fork is intended to bolt onto the 2.520 in. wide x 1/2 in. thru-hole bushings found on GM A-body rear axle housings, as well as the Johnny Joint replacements for the these bushings.
- See for the applicable jam nut for this fork.