This double shear Steering Stabilizer Shock Bracket Kit allows you to relocate the axle housing end of your Jeep JL or JT Gladiator stabilizer shock and move it's mounting point out to the tie rod. This is most commonly done when you upgrade your JL or JT vehicle to a heavier tie rod and are no longer able to mount the shock in it's stock location on the passenger's side tie rod end and are forced to move the shock entirely. Also, aftermarket axles are not equipped with the provisions for remounting the shock to the axle housing.
This bracket will work on JL or JK Wranglers or JT Gladiators that are equipped with 40mm - 42mm diameter tie rod tubes (1.575" - 1.654"). Kit includes all hardware necessary to simply reattach your shock to the tie rod.
This bracket's double shear shock mounting feature and heavy steel clamping components make it superior in strength and function. It may also be used in other universal applications that feature a tie rod tube that is within the fitment parameters of the unit.
If you are needing to entirely relocate your shock on both ends, see our JL/JT High-Mount Steering Stabilizer Shock Reolocation Bracket for the passenger's side end of the shock, part number RJ-441102-101. This additional bracket not only relocates the passenger's side of the shock, but raises the shock above the tie rod to get it way up out of harm's way.
** For use with a traditional steering stabilizer shock only - not for Ram Assist! **