RockJock Antirock® sway bar kits are available in a universal form, for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long fabricated steel arms with a 2" offset bend in them. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.